Paint Protection Film Aftercare Instructions

---

Film should be left for a minimum of 7 DAYS  after installation to allow the adhesive to fully cure. During this time moisture may be visible under the film this should be left to fully evaporate completely. 

Any fitting/lifting marks in the adhesive should be allowed to settle and over time should completely disappear. Temperature and environmental conditions all have an affect on this process so please allow for some variation in time typically around a full month to cure completely. 

Once fully cured, please follow the simple maintenance procedures below, to retain the superior finish of the product.

Always remove contaminants (insect debris, bird droppings etc.) as soon as possible using a pH balanced mild soap. If left on the film for prolonged periods this organic matter may damage the surface and stains can form, just as if left on untreated paintwork.

For best results, prior to washing use a high-foam pre-soak cleaner, to prep the vehicle. Next use a pH neutral shampoo,  to cut through grease and dirt with ease. We recommend using a lambswool mitt for a gentler clean, always ensure that a grit guard or twin bucket method is used to avoid contaminating the mitt. If using a pressure washer, ensure its a minimum of at least about 2 feet away from the surface of the panel and avoid directing jet towards edges to prevent lifting. Use a normal moisture absorbent cloth to dry the film the same as you would the rest of the vehicle.

LEGEND PPF has superior topcoat technology which offers a high gloss shine and hydrophobic abilities, this can be further enhanced with the application of coatings and sealants, however, always do a test patch first to ensure compatibility (not all products are suitable) – we recommend topping with a Ceramic Coating designed to maintain a high gloss and the slickness of the surface and reduce dust build up. 

Over time wax and dust can stick to the edges of the film. To clean; use a regular cotton swab dipped in 70% IPA (lsopropanol alcohol) and wipe away from the edge of the film to remove any residue.

Always avoid polishes that contain abrasives, petroleum or solvents as these can damage the surface of the film, always use synthetic based polishes never carnauba-based waxes. Polishing equipment may be used but at slow speed and with minimal force.

If you have any further questions, or concerns please call us directly at 469-992-9560